Institutional Faucets
- Scullery and Service Sink Faucets and Pre-Rinse Backsplash Type
- Foot Pedal Valves / Knee Valves Spouts
SCULLERY AND SERVICE SINK FAUCETS AND PRE-RINSE BACKSPLASH TYPE
JS-47-TGSA
Backsplash mounted faucet with 4-1/16" reach, gooseneck spout with aerator. Chrome plated cast brass body. Replaceable seats. 1/2”-14 NPT male shank and adjustable flanges. Inlet center line to aerator 6-3/16". Inlet centerline to top of spout 10-3/16".
OPTIONS: W4, W6, B, J-RS, VR-A.
Product Documents
JS-48-TA1
Backsplash mounted faucet with 7-7/8" reach, chrome plated tube spout. Chrome plated cast brass body with lever handles. Replaceable seats. 1/2”-14 NPT male shank and adjustable flanges. Inlet center line to aerator 3-1/2". Inlet centerline to top of spout 5-11/16".
OPTIONS: W4, W6, B, VR-A, VR-H.
Product Documents
JS-48-TA1-DJ
Backsplash mounted faucet with 15" chrome plated double jointed tube spout with aerator. Chrome plated cast brass body with lever handles. Replaceable seats. 1/2”-14 NPT male shank and adjustable flanges. Inlet center line to aerator 5-5/16". Inlet centerline to top of spout 7-5/8". OPTIONS: W4, W6, B, VR-A, VR-H.
Product Documents
J-514
Backsplash mounted. Chrome plated, cast brass bibb faucet with hose end spout. Adjustable flange.
Product Documents
JLK-400
JLK-400 (Not shown) Heavy duty cast brass faucet assembly with rigid spout. Outlet with 1-1/6" hose thread, pail hook, and replaceable seats. Lever handles. Rough chrome plated finish.
OPTIONS: W4, W6.
Product Documents
JVB-1200
Heavy duty cast brass faucet assembly with rigid spout and vacuum breaker. Outlet with 3/4" hose thread, pail hook and top brace to wall with flange; distance from finish wall to outlet adjustable from 9" to 9-1/2". Heavy duty quick-compression quarter-turn stems and replaceable seats; with screwdriver stops built into body. Lever handles. Polished chrome finish. OPTIONS: W4, W6.
Product Documents
JPR-309
A complete pre-rinse unit with mixing faucet to provide the correct water temperature. Assembly is used where a wall or backsplash connection is desired. Recommended where it is necessary to have no obstructions on sink top. Faucet has 8" centers with 1/2" IPS female eccentric flanged union inlets. The spring-action type gooseneck gives the user a wide range of coverage. Unit is 34" high with 15" overhang and measures 5" from bottom of spray valve to centerline of faucet. Chrome plated. Longer length hoses furnished on request.
Product Documents
FOOT PEDAL VALVES KNEE VALVES SPOUTS
JS-10
Wall mounted, chrome plated, rigid 6-7/8" reach, tubular gooseneck spout with aerator (5-7/8" from wall to outlet). 3/8" IPS connection. Includes locknut.
Product Documents
JS-20
Deck mounted, chrome plated, rigid 9" reach, tubular gooseneck spout with aerator (4" from wall to outlet). Includes locknut and coupling nut.
Product Documents
JFV-320
Wall mounted, extra long double pedal valve, with renewable slow closing valve units. Pedals flip up and stay up to clear floor area for cleaning. 1/2" inlets and outlets on 1-1/4" centers. Base to centerline of inlets and outlets 1-5/8". Wall to tip of pedals approximately 14". Polished chrome finish. Loose key stops in inlets for shut-off and volume control. Includes unions, wall flanges, and spout (specify).
Product Documents
JKV-400
Heavy Duty knee valve with cam-acting stirrup for mixing hot and cold water. Valve will maintain set position. 1/2" IPS straight loose key stops on inlets. 1/2" IPS female outlet at rear. Includes spout (specify).
