|
|
SCULLERY AND SERVICE SINK FAUCETS AND PRE-RINSE BACKSPLASH TYPE
 |
JS-47-TGSA
Backsplash mounted faucet with 4-1/16" reach, gooseneck
spout with aerator. Chrome plated cast brass body. Replaceable
seats. 1/2”-14 NPT male shank and adjustable flanges.
Inlet center line to aerator 6-3/16". Inlet centerline
to top of spout 10-3/16".
OPTIONS: W4, W6, B, J-RS, VR-A.
|
|
|
|
JS-48-TA1
Backsplash mounted faucet with 7-7/8" reach, chrome plated
tube spout. Chrome plated cast brass body with lever handles.
Replaceable seats. 1/2”-14 NPT male shank and adjustable
flanges. Inlet center line to aerator 3-1/2". Inlet centerline
to top of spout 5-11/16".
OPTIONS: W4, W6, B, VR-A, VR-H.
|
|
|
 |
JS-48-TA1-DJ
Backsplash mounted faucet with 15" chrome plated double
jointed tube spout with aerator. Chrome plated cast brass
body with lever handles. Replaceable seats. 1/2”-14 NPT
male shank and adjustable flanges. Inlet center line to aerator
5-5/16". Inlet centerline to top of spout 7-5/8".
OPTIONS: W4, W6, B, VR-A, VR-H.
|
|
|
 |
J-514
Backsplash mounted. Chrome plated, cast brass bibb faucet
with hose end spout. Adjustable flange.
|
| |
| |
JLK-400 (Not Pictured)
JLK-400 (Not shown) Heavy duty cast brass faucet assembly
with rigid spout. Outlet with 1-1/6" hose thread, pail
hook, and replaceable seats. Lever handles. Rough chrome plated
finish.
OPTIONS: W4, W6.
|
| |
 |
JVB-1200
Heavy duty cast brass faucet assembly with rigid spout and
vacuum breaker. Outlet with 3/4" hose thread, pail hook
and top brace to wall with flange; distance from finish wall
to outlet adjustable from 9" to 9-1/2". Heavy duty
quick-compression quarter-turn stems and replaceable seats;
with screwdriver stops built into body. Lever handles. Polished
chrome finish.
OPTIONS: W4, W6.
JVBR-1201 identical to JVB-1200 except with rough chrome
plated finish.
|
|
|
 |
JPR-309
A complete pre-rinse unit with mixing faucet to provide the
correct water temperature. Assembly is used where a wall or
backsplash connection is desired. Recommended where it is
necessary to have no obstructions on sink top. Faucet has
8" centers with 1/2" IPS female eccentric flanged
union inlets. The spring-action type gooseneck gives the user
a wide range of coverage. Unit is 34" high with 15"
overhang and measures 5" from bottom of spray valve to
centerline of faucet. Chrome plated. Longer length hoses furnished
on request.
|
|
(TOP) |
FOOT PEDAL VALVES KNEE VALVES SPOUTS
 |
JS-10
Wall mounted, chrome plated, rigid 6-7/8" reach, tubular
gooseneck spout with aerator (5-7/8" from wall to outlet).
3/8" IPS connection. Includes locknut.
|
|
|
|
JS-20
Deck mounted, chrome plated, rigid 9" reach, tubular
gooseneck spout with aerator (4" from wall to outlet).
Includes locknut and coupling nut.
|
|
|
 |
JFV-320
Wall mounted, extra long double pedal valve, with renewable
slow closing valve units. Pedals flip up and stay up to clear
floor area for cleaning. 1/2" inlets and outlets on 1-1/4"
centers. Base to centerline of inlets and outlets 1-5/8".
Wall to tip of pedals approximately 14". Polished chrome
finish. Loose key stops in inlets for shut-off and volume
control. Includes unions, wall flanges, and spout (specify).
|
|
|
 |
JFV-300
Floor mounted, double pedal valve, with renewable slow closing
valve units. 1/2" inlets and outlets on 1-1/4" centers.
Base to centerline of inlets and outlets 1-5/8". Polished
chrome finish. Loose key stops in inlets for shut-off and
volume control. Includes unions, wall flanges, and spout (specify).
|
|
|
 |
JKV-400
Heavy Duty knee valve with cam-acting stirrup for mixing hot
and cold water. Valve will maintain set position. 1/2"
IPS straight loose key stops on inlets. 1/2" IPS female
outlet at rear. Includes spout (specify).
|
|
(TOP) |
|
