Countertops
Marquis Group
Custom
As a stainless steel fabricator with over seventy years of experience,
Just Manufacturing is the leading fabricator of high quality sink
tops and counters for medical, academic, institutional and residential
applications. Counter tops can be made with a large variety of features
to allow your stainless steel top to fit your application. Contact
the factory or your just representative for all your counter requirements.
|
DM-72-34 Marquis Top
Shown with JTR-51faucet, JB-99 drains and a JHDD-2000 vandal
resistant stainless steel soap dispenser.
Seamlessly welded construction of 18 GA TYPE 304 corrosion
resistant stainless steel bowls with anti-splash rims. Drainboards
double-pitched to bowl via concave shaped design. Straight
sided 1-3/4" radius max capacity bowls. Drainboards have
structural bracing of 16 GA mild steel. Blended satin finish
is applied to all interior and exterior exposed surfaces.
Undercoated with a full coat of sound deadening.
|
|
|
Custom Features
CUSTOM TOPS ARE PRODUCED OF 16 GA TYPE 304 CORROSION RESISTANT
STAINLESS STEEL. Seamlessly welded construction with concave drainboards,
anti-splash bowl rims and marine edge standard construction. Drainboards
have structural bracing of 16 GA mild steel. Blended satin finish
applied to all interior and exterior exposed surfaces. Fully undercoated
to insulate for sound reduction and condensation absorption.
The following features are available as specification options
for varied applications.
 |
Column cutouts, partial (shown) or full,
takes into account structural and plumbing supply interference
when installing the top.
|
| |
 |
Full radius end on flat counters; common
in contemporary design.
|
| |
 |
Opening for appliances and laboratory equipment.
Also available open at the front for slide-in equipment.
|
| |
 |
Aprons, integral and offset.
Aprons can be full length, or partial in front of the bowl
only.
|
| |
 |
Radius end on counters with backsplashes.
|
| |
 |
Partial backsplash notch
to fit around cabinets and windows.
|
| |
 |
Full backsplash notches
around utilities and fixtures.
|
| |
 |
Partial endsplash to cover columns or
appliances that do not reach to the front of the counter
|
| |
|
