Commercial stainless steel sinks and plumbing fixtures have made Just Manufacturing
an industry leader for quality, design and durability . Since 1933 our stainless steel commercial sinks and fixtures have been
specified for sink projects worldwide.
Our commercial grade stainless steel sinks are the correct choice for your
sink project as they are:
In-stock - 95%+ off-the-shelf fill-rate
Easy to maintain
True gauge stainless steel sinks
Sinks that offer generous capacity.
Click on the Stainless Steel Sink configuration below:
Just Manufacturing’s commercial grade stainless steel sinks and commercial
plumbing fixtures offer flexible spec solutions with the broadest product
offering in the industry.
application specific product groups include:
Academic and Classroom
Assisted Living and ADA
Commercial Food Service
Hospital and Health Care
Bar and Hotel Suite
Institutional and Laboratory
Cleaning and Janitorial
"Commercial Quality" Residential
unique for your project that can't be found as a stock sink product?
If a stock commercial product
is not the answer, we are experts in custom stainless steel commercial sinks!
No project is too small for a custom stainless steel sink
that is Made in the USA.
uses 18-8 type 304 certified USA milled stainless steel to produce the best
commercial stainless steel sinks available. The complete line of Just Manufacturing sinks
and fixtures are Made in USA, right in the "Heartland of America". All
are produced with 100% American steel and certified for ARRA project work specifications.
People count on Just Manufacturing for Commercial Sinks and you can be assured that service and
reliability are a Just constant!
Learn more about when and how to wash your hands
from the CDC
An ounce of prevention ...
|Forget the pound of cure.
Stainless Steel is easily kept stain-free with these simple sink cleaning tips on
how to clean stainless steel sink :|
Since most soaps and detergents contain chlorides, Just recommends frequent
rinsing of your stainless steel sink, preferably after each use.
simple daily treatment with weekly cleansing with an abrasive cleaner, ideally
Bon-Ami or Zud. Unlike porcelain sinks, durable stainless steel stands up strongly to
abrasive cleansers. Remember always to scrub in the direction of the polish
lines so that your efforts blend with the surface of your sink. For less
aggressive approach, try cleaning your stainless steel sink with a paste of baking soda and
water. Rinse well and dry. Regularly drying your sink works wonders to prevent
water and surface rust marks.
Looking for that
extra sparkle? Use flour power to polish your stainless steel sink by applying dry flour when
the look you're after is a gleaming finish. Rub the flour in with a soft cloth,
and then rinse and dry.
Club soda will do
the sparkle trick as well. After placing the stopper in your sink, pour some
club soda in and rub with a soft cloth. As always, dry with soft cloth to
prevent water spots and surface rust.
Add some shine
with a few drops of baby oil. Wipe off with paper toweling and repeat for added
||Some things are best avoided:
A few DONT's for Stainless Steel care...|
Do not let soap
cleansers dry on the sink's surface. Rinse regularly to keep the chlorides found
in most cleansers from affecting the natural luster of stainless.
Steer clear of
steel wool pads. The iron particles that are left behind can lead to rust and
corrosion. For hard-to-clean projects, try a ScotchBrite scouring pad when the
job at hand requires a little extra effort, again in the direction of the grain.
steel and cast iron cookware in your sink for extended periods of time. Iron
plus moisture on top of stainless can lead to surface rust and staining.
Rubber dish mats,
wet sponges and cleaning pads are a no-no for a lengthy stay in your sink. Since
they trap water, discoloration and staining can result.
Just as you do
not use your cutting board to clean the dishes, do not use your sink as a cutting
board. Knives and other sharp kitchen instruments will naturally damage the
surface of your sink.
In-plant production as well as inbound Raw materials
and Packaging are factored in to our
planning recycling efforts.
Recycling: Raw materials
The sink/plumbing fixture
production process includes
type 304 and 316 steel. 75
to 80% of the ingredients
used for newly melted
stainless coils delivered to
Just Mfg are of recycled
scrap. Our mill source is
located approx 330 miles
from our facility.
In-plant, scrap stainless
byproduct is accumulated
daily and picked up weekly
by our contracted scrap
hauler. This raw material is
ultimately recycled into new
metal on the mill level.
Cans, bottles and paper from
packaged foods and inbound
corrugated packaging are
recycled as well. Recycling
materials are accumulated at
collection points on the